Norwegian Silver Marks: 830S, 925S and Enamel Makers

Affiliate disclosure: White Metal Resources may earn a commission when readers open an account through links on this site. That never changes what you pay or what we write. We are not financial or tax advisors. Consult a licensed advisor before making decisions with money.

Quick answer: Norwegian silver carries two legal fineness marks. 830S means 83.0 percent silver by weight and covers most twentieth century corpus pieces. 925S means 92.5 percent sterling silver and typically covers Norwegian enamel work, since the harder sterling base holds guilloche enamel better. The three big enamel firms are J. Tostrup (1832), David-Andersen (1876) and Marius Hammer in Bergen.

Short on time? The essentials

  • Norway recognises two silver standards by law. 830S is the historical Scandinavian standard at 83.0 percent silver by weight. 925S is sterling at 92.5 percent silver by weight. Norwegian law bans selling anything under 830 parts per thousand as silver.
  • 830S was the default for domestic Norwegian corpus pieces across the twentieth century. The alloy balance is 17 percent copper, added for working hardness on hollowware and flatware.
  • 925S is the standard for Norwegian enamel work. Store norske leksikon notes that sterling is used in Norway for enamel products specifically, because the harder base metal holds a guilloche or plique-a-jour enamel layer more reliably.
  • The S suffix on 830S or 925S confirms silver as the metal (from the Norwegian word sølv). Pieces made before the modern standards may carry a two-digit lod number from an older Scandinavian system.
  • Edelmetallkontrollen was the Norwegian state body that enforced the precious metals law. It was established in 1891 under the edelmetalloven and operated through an appointed guardein, the assay master role.
  • J. Tostrup, founded in Christiania in 1832 by Jacob Ulrich Holfeldt Tostrup (1806 to 1890), produced the enamelled St. Olav Order from 1848 and took full order production around 1883. The firm became royal court jeweler in 1888.
  • David-Andersen, founded by David Andersen (1843 to 1901) in Christiania in 1876, opened a dedicated enamel workshop in 1887 to 1888 at Prinsens gate 12. The firm became internationally known for guilloche and plique-a-jour enamel.
  • Marius Hammer (8 January 1847 to 13 January 1927) ran a major workshop in Bergen. His filigree silver viking ships with plique-a-jour enamel sold in London through The Viking Enamel Co. and he was supplier to the Prince of Wales from 1885.
  • Melt math on a Norwegian piece uses the stamped fineness as a decimal, multiplied by the gross silver weight in grams. Enamel glass and non-silver fittings are not silver and should be excluded from the melt weight before any calculation.
  • Signed Norwegian enamel pieces by Tostrup, David-Andersen or Marius Hammer carry collector interest well above melt value at well-attended auctions. Actual premiums are qualitative and require specialist authentication for each piece.

Norwegian silver reaches American homes through several routes. It arrives in a probate box as a Tostrup brooch with coloured guilloche enamel. It appears in an estate sale lot as a David-Andersen demitasse spoon stamped 925S. It travels back from a Bergen trip as a Marius Hammer filigree viking ship with plique-a-jour windows.

Each of those pieces carries a cluster of marks that reads in a fixed order once you know the Norwegian system. This page covers the 830S and 925S fineness standards, the maker's mark families of the three big enamel firms, and the melt math that applies when a piece is partly enamel and partly silver.

New to silver IRAs?What Are The Best Silver IRA Companies?

The four stamp types on a Norwegian silver piece

A well marked Norwegian silver piece typically carries four stamp types on the same discreet surface. The fineness number states the silver content as a parts per thousand value. The maker's mark names the workshop or firm. The S suffix confirms the metal is silver (sølv in Norwegian). On older or formally assayed pieces, a date letter or guardein mark may appear alongside.

Reading these four stamps in order identifies the fineness, attributes the piece to a workshop, and dates it to a broad window. The fineness drives all melt math without any other mark. The maker's mark drives any collector premium above melt, which is where Tostrup, David-Andersen and Marius Hammer attribution matters most to a reader.

Modern Norwegian silver may show a reduced mark cluster, with the fineness and the maker's name present but the date letter omitted. Older pieces from the first half of the twentieth century commonly carry the full set. A faint or worn mark often reads clearly under raking light and a loupe.

Hollowware pieces carry marks on the underside of the foot. Flatware pieces carry marks on the back of the handle near the join. Enamel brooches, pendants and buckles carry marks on the inside of the pin bar or on a plain reverse section of the silver. Jewelry rings carry marks on the inside of the band.

The 830S Norwegian silver standard

The 830S mark on Norwegian silver denotes an alloy at 830 parts per thousand fineness, or 83.0 percent pure silver by weight. Store norske leksikon notes that Norwegian law sets this as the minimum silver content for a product sold as silver. The remaining 17 percent of the alloy is copper, added for working hardness on hollowware and cutlery.

830S was the default for Norwegian domestic corpus pieces across most of the twentieth century. Flatware patterns, coffee services, serving pieces, candlesticks, bowls and trays made for the Norwegian market most commonly carry the 830S stamp. The alloy sits in the same Scandinavian band shared with historic Danish and Swedish silver at the same fineness.

The S suffix on 830S is the Norwegian confirmation that the metal is silver. The S stands for sølv, the Norwegian word for silver. Pieces may show the mark as 830S, as 830 S with a space, or as 830 followed by a small S inside the same punch. All three variants carry the same meaning.

830 silver holds about 10 percent less pure silver per gram than sterling at the same gross weight. On a 400 gram serving tray the 830 alloy carries 332 grams of pure silver, while a sterling tray of equal weight carries 370 grams. The gap matters for melt math and should be noted before any sale decision.

The 925S Norwegian sterling standard

The 925S mark on Norwegian silver denotes sterling silver at 925 parts per thousand fineness, or 92.5 percent pure silver by weight. This is the international sterling standard shared with British, American, Mexican and modern Continental silver. Store norske leksikon states that 925S is used in Norway specifically for enamel products.

The reason sterling is chosen for Norwegian enamel work is practical. Enamel is a glass layer fused to silver at around 750 to 850 degrees Celsius. The harder sterling alloy holds the enamel layer more reliably than 830 silver, which is softer and more prone to micro-cracks under the enamel.

Classic Norwegian enamel pieces by J. Tostrup, David-Andersen and Marius Hammer therefore commonly carry a 925S stamp rather than an 830S stamp, even on pieces made in a period when 830 was the Norwegian norm for corpus silver. The fineness mark is the simplest way to confirm the piece was built on a sterling base intended for enamel.

A reader with a Norwegian enamel brooch, pendant, buckle or demitasse spoon should expect to see 925S or 925 S on the reverse. A piece stamped 830S with enamel is uncommon but not impossible. The mark drives the melt math on the silver portion of the piece.

Edelmetallkontrollen and the guardein role

Norwegian silver quality has been enforced by state inspection since the late nineteenth century. The Norwegian Wikipedia article on Edelmetallkontrollen states that the body was established in 1891 and operated under the edelmetalloven, the precious metals law. Its mandate was to verify that silver products matched their stamped fineness.

Day to day work was led by an edelmetallguardein, the Norwegian title for the assay master. The guardein checked random samples from workshops and importers to confirm the alloy met the stated standard. A piece that fell short of 830 parts per thousand could not be legally sold as silver in Norway.

Later in its operating life, Edelmetallkontrollen outsourced the inspection work to the private foundation Teknologisk Institutt on behalf of the responsible ministry. The body was funded by levies from Norges Gullsmedforbund (the Norwegian goldsmiths' trade body) and other industry groups, plus annual fees from any firm producing or trading in precious metals.

In practical identification terms, the Edelmetallkontrollen framework is why a Norwegian piece typically carries a visible fineness mark and a maker's mark on the same surface. The pair reads as a declaration under the precious metals law. Older pieces may add a date letter or a guardein initial, which require a specialist Norwegian hallmark reference for exact decoding.

J. Tostrup, the first great Christiania firm

J. Tostrup was founded in Christiania (now Oslo) in 1832 by Jacob Ulrich Holfeldt Tostrup. Store norske leksikon records the founder's dates as 1806 to 1890 and the founding year as 1832. Jacob Tostrup grew up at Sande in Hjelmeland, apprenticed in Bergen under Christopher Desingthun and completed his journeyman wandering through St. Petersburg and Copenhagen before settling in Christiania.

The Norwegian Wikipedia Jacob Tostrup article confirms that he held the title of royal court jeweler from 1888. From 1848 the firm produced the enamelled badges of the Order of Saint Olav, and from around 1883 J. Tostrup held full production rights for the Order. The enamel work on Norwegian royal and civic orders remains a defining line of the firm's output.

Tostrup also drove the mechanisation of the Norwegian goldsmith trade. The workshop built steel dies that pressed thin silver sheet into handles and bodies, which lowered unit cost and made quality silver available to a wider Norwegian market. The firm became an active trader in old silver, which brought antique pieces back into circulation for restoration and resale.

The firm's work in silver and enamel earned international recognition at world exhibitions through the nineteenth and twentieth centuries. Store norske leksikon notes that successive J. Tostrup designers were widely awarded in Norway and abroad. The business was sold out of the Tostrup family in the mid 1980s and later closed.

David-Andersen and the 1888 enamel workshop

David-Andersen was founded in 1876 in Christiania by David Andersen. Store norske leksikon gives his dates as 1843 to 1901. He apprenticed under J. Tostrup, worked in several London workshops, and opened his own firm as what he called a factory, with mechanised equipment from the start.

You may also like:  Sterling Silver Jewelry Melt Value: The 925 Reality

The decisive step was the opening of a dedicated enamel workshop in 1887 to 1888 at Prinsens gate 12. Store norske leksikon notes that the firm quickly specialised in several enamel techniques, including gruveemalje (champleve), vindusemalje (plique-a-jour) and celle-emalje (cloisonne). Each technique sits on a sterling silver base.

The Bohemian designer Gustav Gaudernack joined the firm in 1893 after Johan Lund left for an independent career. Gaudernack designed naturalistic silver and enamel pieces featuring animals and flowers, and from around 1895 he worked in the Norwegian national dragon style. His models remain among the firm's most sought after collector pieces.

The firm's name was changed from David Andersen to David-Andersen, with a hyphen between the two names, in 1942. The business continued through the twentieth century with successive designers including Ludwig Wittmann, Johan Sirnes, Thorbjorn Lie-Jorgensen, Harry Sorby, Guttorm Gagnes and later Bjorn Sigurd Ostern. The workshop at Trondheimsveien closed in 2001.

Marius Hammer and the Bergen tradition

Marius Hammer is the third name any American reader with Norwegian silver should recognise. Store norske leksikon records his full name as Marius Lauritz Hammer, born in Bergen on 8 January 1847 and died in Bergen on 13 January 1927. He was the son of goldsmith master Lauritz Hammer (1812 to 1874).

Hammer's workshop built silver filigree pieces that caught international attention. Store norske leksikon notes that from around 1890 the Norwegian dragon style dominated his output, and that silver filigree viking ships with plique-a-jour window enamel became a major export success. The combination of filigree work and transparent enamel is a defining Hammer signature.

His London distribution ran through a dedicated outlet called The Viking Enamel Co. From 1885 he was supplier to the Prince of Wales, which built his reputation in the British market and drove export volume. Hammer displayed at the Paris world's fair in 1885 with three cabinets and at the Stockholm exhibition in 1897 with a filigree showing.

Marius Hammer pieces travel widely in American estates today, more than other Norwegian makers of similar scale. A Bergen filigree brooch with plique-a-jour enamel is one of the more recognizable patterns in the Hammer catalogue. His workshop closed later in the twentieth century after Hammer's death in 1927.

How guilloche and plique-a-jour enamel sit on silver

Norwegian enamel work falls into several named techniques, each with its own layer logic. Champleve lays coloured enamel into recesses cut into the silver base. Cloisonne lays enamel into cells formed by thin silver wires soldered to the base. Plique-a-jour lays transparent enamel into open silver wire frames with no backing, so light passes through.

Guilloche enamel sits on top of a machine engraved silver surface. The silver base is first turned on an engine lathe to cut a repeating geometric pattern, then covered with a thin layer of transparent coloured enamel. The pattern reads through the enamel and gives the surface its signature optical depth. The Faberge house popularised the technique on Russian imperial pieces.

Norwegian firms adopted guilloche enamel in the late nineteenth and early twentieth century. David-Andersen pieces by Gustav Gaudernack and later designers, and J. Tostrup pieces across the same period, often carry guilloche enamel on a sterling base. The 925S fineness mark is the practical signal that the base metal is sterling rather than 830 silver.

Enamel is glass fused to silver at kiln temperature. It is not silver. For melt math the enamel portion of a piece must be excluded from the weight before any calculation. On a brooch with a large enamel panel the enamel alone can carry 10 to 30 percent of the gross weight. Specialist authentication at a silver auction house can estimate the silver share more precisely than a kitchen scale.

Melt content per gram on 830S and 925S

The table below runs the melt content per gram of alloy on the two Norwegian silver fineness standards. All figures use an illustrative silver spot price of 30 dollars per troy ounce, which is a stated example and not a market quote. The formula is fineness times silver gram weight divided by 31.1035 grams per troy ounce, multiplied by the spot price.

Silver melt content per gram of alloy, at 30 dollars per troy ounce (illustrative)
MarkFinenessPure silver per gram of alloyTroy ounces of silver per gram of alloyMelt value per gram at 30 dollars per ounce
830S0.8300.830 grams0.02668 ozt0.8005 dollars
925S0.9250.925 grams0.02974 ozt0.8922 dollars

Computed from the standard melt formula: fineness times gross grams divided by 31.1035 grams per troy ounce, multiplied by the stated spot price. Fineness values from Store norske leksikon (checked October 2026). Spot price of 30 dollars per troy ounce is an illustrative example, not a current market quote.

The gap between 830S and 925S alloy content works out to about 9.2 cents per gram at the illustrative 30 dollars per troy ounce. On a 200 gram David-Andersen bowl the gap is about 18 dollars in melt content. On a 15 gram Tostrup enamel brooch the gap is small, but enamel glass takes a bigger relative bite out of the weight.

Norwegian standards on the fineness scale

The chart below places the two Norwegian silver standards on a single millesimal fineness scale alongside continental 800, Britannia 958 and fine silver 999 for reference. The visual shows that 830S sits in the middle of the decorative silver range, above the continental 800 floor and below the international sterling standard.

Horizontal bar chart of Norwegian silver fineness standards on a millesimal scale. Continental 800 silver sits at the bottom as a European reference. Norwegian 830S, the default twentieth century domestic standard for corpus silver, sits above the continental floor. International sterling at 925S, used in Norway for enamel products on a sterling base, sits above 830S. British Britannia at 958 appears above sterling as a historical reference. Fine silver bullion at 999 appears at the top of the scale. The chart shows that Norwegian decorative silver clusters in the 830 to 925 band, between the European 800 floor and the bullion 999 standard.
Two Norwegian silver standards ranked by pure silver content, with continental 800, Britannia 958 and fine silver 999 shown as low-end and high-end references. Sources: Store norske leksikon on silver and goldsmith trade (830S and 925S fineness); Wikipedia Silver standards article (continental 800, Britannia 958, fine 999). Checked October 2026.

Two takeaways sit in the chart. First, Norwegian 830S silver holds meaningfully more pure silver per gram than continental 800 silver, so an inherited Norwegian corpus piece prices above a comparable German 800 piece on melt alone. Second, the gap between 830S and modern 925S Norwegian sterling is about 10 percent, so a reader with mixed-era Norwegian silver should run the melt math separately for each fineness.

A six step method for reading a Norwegian mark

The steps below turn the country notes above into one repeatable method. Follow the six steps on any Norwegian silver piece to identify the fineness, the maker, the enamel share if any, and the melt math in a fixed order.

  1. Locate every stamp on the piece. Marks on Norwegian hollowware sit on the underside of the foot or inside the lid rim. Marks on flatware sit on the back of the handle near the join. Marks on enamel jewelry sit on the plain reverse of the piece or on the inside of a pin bar. Photograph the marks under raking light so every stamp is visible.
  2. Read the numeric fineness first. A three digit number of 830 or 925 is the millesimal silver content. That number sets the melt math on the silver portion of the piece without any other information from the mark cluster. The S suffix on 830S or 925S confirms silver as the metal.
  3. Read the maker's mark. A rectangular stamp, a monogram or a script signature identifies the workshop. J. Tostrup pieces carry a Tostrup mark, often with Oslo or Christiania as a city indicator. David-Andersen pieces carry a David-Andersen mark, with earlier pieces reading David Andersen without the hyphen. Marius Hammer pieces carry an MH monogram or his full name.
  4. Note any date letter or guardein mark. Older Norwegian silver may show an additional small punch with a letter or initials next to the fineness. Those marks tie to the Edelmetallkontrollen inspection framework and require a specialist Norwegian hallmark reference for exact year or inspector decoding.
  5. Estimate the enamel share if the piece is enameled. On a plain silver piece the gross weight is the melt weight. On an enamel piece the glass covering adds non-silver mass, often 10 to 30 percent of the gross weight on a brooch or pendant. Deduct that share from the weight before any calculation if the piece is substantially enameled.
  6. Run the melt math. Weigh the piece on a kitchen or jewelry scale in grams. Multiply the estimated silver gram weight by the fineness as a decimal (0.830 or 0.925). Divide by 31.1035 to get troy ounces of pure silver. Multiply by the spot silver price to get the melt value in dollars.

Any Norwegian silver piece that fails at step 2 should be checked for a mark in a less obvious spot before being treated as unmarked. Any piece that fails at step 3 is still Norwegian silver by law if a legal fineness mark is present, but the maker attribution is harder without the second stamp. Steps 4 through 6 apply to every piece with a legible fineness.

A worked melt example on a Norwegian enamel piece

Reading the mark decides the fineness. The fineness then runs the melt math on any weight and any stated spot price. The example below applies the six step method to a 925S David-Andersen enamel brooch and converts the fineness numeral into an illustrative melt value.

The same six step method reads any Norwegian piece. Switch the fineness multiplier to 0.830 for a 830S David-Andersen bowl or a Tostrup serving tray. The maker check and the enamel share estimate read the same way across both fineness standards.

Limits and caveats to keep in mind

Every fineness number on this page is a legal or trade standard tied to a national marking system. It asserts the standard a piece was made to, not a live assay of the object in hand. A worn, repaired or altered piece can test slightly under the marked standard. Specialist verification via X-ray fluorescence is the only way to check the actual silver content on a specific piece.

All melt figures on this page are computed from a stated silver spot price. Silver spot moves continuously during market hours. The 30 dollars per troy ounce used in the table and example is an illustrative round number for computation. It is not a forecast, not a current market quote, and not a guarantee of any future price.

Specific Norwegian guardein marks, date letters and workshop numbers on a given piece require a specialist Norwegian hallmark reference for authoritative decoding. This page points a reader at a published reference or at a specialist auction house rather than reproducing a full year letter table. The fineness mark alone drives the melt math, and the maker's mark drives any collector premium.

Enamel share estimates in a melt example are visual approximations, not laboratory measurements. On a heavily enameled piece the enamel glass can carry up to a third of the gross weight. Any sale decision on a significant Norwegian enamel piece should rest on a specialist appraisal, not a kitchen scale estimate.

Collector premiums for named Norwegian enamel pieces are qualitative and vary with the auction market. A documented Tostrup, David-Andersen or Marius Hammer piece in original condition commonly sells at a strong premium over melt at a specialist auction. This page does not quote dollar premiums, because those depend on completed public auction sales for the specific pattern and condition.

Rare-coin numismatic value and antique coin silver valuation are outside the scope of this page. Norwegian silver coinage and historical currency belong to the numismatic market rather than to a decorative silver melt reference. Numismatic valuation requires specialist coin dealers rather than a melt-driven approach.

Silver held for retirement follows a separate fineness rule at 0.999 or higher. The Internal Revenue Code sets the minimum for silver held in a self-directed IRA at 0.999 fineness, a topic covered in our silver IRA explainer. That threshold sits well above every Norwegian decorative silver standard on this page. Norwegian 830S and 925S silver can be owned personally without any IRA-related restriction.

Norwegian silver mark questions, answered

What does the 830S mark on Norwegian silver mean?

An 830S mark means the piece is Norwegian silver at 830 parts per thousand fineness, or 83.0 percent pure silver by weight. 830S was the default standard for twentieth century Norwegian corpus pieces including flatware, hollowware, candlesticks and serving items. The S suffix confirms silver as the metal, from the Norwegian word sølv. Norwegian law bars any product under 830 parts per thousand from being sold as silver.

What does the 925S mark on Norwegian silver mean?

A 925S mark means the piece is sterling silver at 925 parts per thousand fineness, or 92.5 percent pure silver by weight. Store norske leksikon notes that 925S is used in Norway specifically for enamel products, since the harder sterling base holds a guilloche or plique-a-jour enamel layer more reliably than 830 silver. A Norwegian enamel brooch, pendant or buckle therefore typically carries a 925S stamp.

Who were the main Norwegian silver and enamel firms?

The three names any American reader should know are J. Tostrup, David-Andersen and Marius Hammer. J. Tostrup was founded in Christiania in 1832 by Jacob Ulrich Holfeldt Tostrup. David-Andersen was founded in Christiania in 1876 by David Andersen. Marius Hammer ran a major workshop in Bergen from the mid nineteenth century. All three became internationally known for silver with coloured enamel work.

What is guilloche enamel on Norwegian silver?

Guilloche enamel is a layer of transparent coloured enamel laid over a machine engraved silver surface. The silver is first turned on an engine lathe to cut a repeating geometric pattern, then covered with a thin layer of enamel that lets the pattern read through. The Faberge house popularised the technique on Russian imperial pieces. Norwegian firms including David-Andersen and J. Tostrup adopted guilloche enamel on sterling 925S bases.

What is plique-a-jour enamel on Norwegian silver?

Plique-a-jour is a translucent enamel laid into open silver wire frames with no backing, so light passes through the enamel like a stained glass window. The Norwegian term is vindusemalje. Marius Hammer in Bergen used plique-a-jour on silver filigree viking ships, which sold internationally through The Viking Enamel Co. in London from 1885 onward. David-Andersen also produced plique-a-jour pieces at the Prinsens gate workshop.

How does enamel affect the melt math on a Norwegian piece?

Enamel is glass fused to silver at kiln temperature. It is not silver, so it should be excluded from the melt weight before any calculation. On a Norwegian enamel brooch or pendant, enamel can carry 10 to 30 percent of the gross gram weight. A conservative deduction before running the fineness math gives a reasonable melt figure. For a significant piece, a specialist appraisal is more accurate than a kitchen scale estimate.

Can Norwegian 830S or 925S silver go inside a self-directed IRA?

No. The Internal Revenue Code sets the fineness minimum for silver held in a self-directed IRA at 0.999. Both Norwegian decorative silver standards on this page sit below that line, so hallmarked Norwegian silver flatware, hollowware, jewelry and enamel pieces cannot be held inside a self-directed IRA account. Norwegian silver at 830S or 925S can be held personally without any IRA-related restriction.

Should I sell inherited Norwegian enamel silver to a scrap dealer?

Usually not without specialist authentication first. A signed J. Tostrup, David-Andersen or Marius Hammer enamel piece commonly sells at an auction premium well above its 830S or 925S melt content, so scrapping to a refiner surrenders real value. A specialist silver auction house or a dealer familiar with Norwegian enamel work can appraise the piece against its pattern, maker's mark and condition before any sale decision.

Sources

  1. Store norske leksikon, Sølv (Norwegian national encyclopedia entry on silver: Norwegian law sets a minimum 83 weight percent silver for products sold as silver, marked 830 S; sterling silver at 92.5 weight percent silver marked 925 S in Norway; two legal Norwegian silver alloys 830S and 925S; alloy balance is copper for working hardness). Checked October 2026.
  2. Norwegian Wikipedia, Sølv (Silver: Norway uses two alloys, 830S and 925S; 830S means 830 thousandths silver and 170 thousandths copper, used for utility and ornamental objects (corpus items); 925S or sølv sterling used for enamel products; minimum 830 thousandths required by Norwegian law to sell as silver). Checked October 2026.
  3. Norwegian Wikipedia, Edelmetallkontrollen (Norwegian state administrative body for precious metals inspection, established under the edelmetalloven precious metals law, with activity dating to 1891; led by an appointed edelmetallguardein as assay master; later inspection work outsourced to Teknologisk Institutt; funded by levies from Norges Gullsmedforbund and other industry groups). Checked October 2026.
  4. Store norske leksikon, J. Tostrup (Norwegian silver and goldsmith firm founded by Jacob Ulrich Holfeldt Tostrup, 1806 to 1890, in Christiania in 1832; apprenticed in Bergen under Christopher Desingthun; worked in St. Petersburg and Copenhagen before Christiania; led mechanisation of Norwegian goldsmith trade; firm known for silver with enamel work; sold out of Tostrup family mid 1980s). Checked October 2026.
  5. Norwegian Wikipedia, Jacob Tostrup (1806 to 1890, Norwegian goldsmith in Christiania now Oslo with title royal court jeweler from 1888; founded firm J. Tostrup in 1832; produced the enamelled badges of the Order of Saint Olav from 1848, with full Order production from around 1883; traded in antique silver as Christiania's first antique dealer). Checked October 2026.
  6. Store norske leksikon, David-Andersen (Norwegian goldsmith firm founded 1876 in Christiania by David Andersen, 1843 to 1901; apprenticed under J. Tostrup; opened dedicated enamel workshop 1887 to 1888 at Prinsens gate 12; specialised in gruveemalje champleve, vindusemalje plique-a-jour and celle-emalje cloisonne; Gustav Gaudernack designer from 1893; firm name changed to David-Andersen with hyphen in 1942). Checked October 2026.
  7. Norwegian Wikipedia, David Andersen gullsmed (1843 to 1901; Norwegian goldsmith; apprenticed abroad after Norway; established own goldsmith workshop in Christiania in 1876 at Kirkegaten 19 with two journeymen; firm moved in 1888 to own building at Prinsens gate 12 with modern machinery and own electric power station; firm continued as family business David-Andersen AS). Checked October 2026.
  8. Store norske leksikon, Marius Hammer (Marius Lauritz Hammer, Norwegian goldsmith, born 8 January 1847 in Bergen, died 13 January 1927 in Bergen; son of goldsmith master Lauritz Hammer; famous for silver filigree in Norwegian dragon style and plique-a-jour window enamel from around 1890; London sales through The Viking Enamel Co.; supplier to the Prince of Wales from 1885; participated at Paris world's fair 1885 and Stockholm 1897). Checked October 2026.
  9. Wikimedia Commons, Category Marius Hammer (categorised 1847 births, 1927 deaths; silversmiths from Norway; goldsmiths from Norway; people of Bergen Norway; media files of Marius Hammer workshop silver and enamel pieces). Checked October 2026.
  10. Wikipedia, Silver standards (millesimal fineness definitions and world silver standards; Scandinavian silver at 830 parts per thousand with 83 percent silver and 17 percent copper; sterling at 925 parts per thousand with 92.5 percent silver and 7.5 percent copper; continental silver at 800 parts per thousand floor; Britannia at 958 parts per thousand; fine silver bullion at 999 parts per thousand). Checked October 2026.
  11. Electronic Code of Federal Regulations, Federal Trade Commission Guides for the Jewelry, Precious Metals, and Pewter Industries (16 CFR Part 23, legal requirements for representing an object as silver, sterling silver, or coin silver in the United States, including quality-mark rules for imported silver goods such as Norwegian 830S and 925S). Checked October 2026.
  12. Cornell Legal Information Institute, 26 U.S.C. section 408 (silver fineness rule for IRA metals at 0.999 minimum, referenced to the delivery standard of a regulated futures contract; excludes decorative Norwegian silver at 830S or 925S from self-directed IRA accounts). Checked October 2026.
Peter gold expert at Whitemetalres.com

About the author

Peter is a seasoned analyst with a deep understanding of the precious metals market. He specializes in providing readers with up-to-date information and expert analysis on the latest trends in gold, silver, platinum, and palladium. His passion for the industry and dedication to research make him a valuable asset to the team and a trusted source of information for our readers.

Leave a Comment